https://tylaska.com/product-tag/boomkicker/ Engineered Performance Fri, 12 Sep 2025 16:51:48 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.1 https://tylaska.com/wp-content/uploads/cropped-wordpress-icon-1-32x32.jpg https://tylaska.com/product-tag/boomkicker/ 32 32 https://tylaska.com/product/k1500-customized-for-jboats-j30-boom-kicker-by-tylaska/ Thu, 17 Apr 2025 15:32:55 +0000 https://tylaska.com/?post_type=product&p=4711

Robust fiberglass and aluminum construction

Suggested Boat Size - JBoats J30

Initial Pin to Pin - 53 in

Maximum Pin to Pin - 48 in

Maximum Force (1) - 600 lb

Stroke -

• Initial (2) - 16 in
• Min (3) - 9 in

 ]]> Boomkickers  use two coated solid fiberglass spring rods to provide the force necessary to support the boom and mainsail. The rods are clamped into teflon coated, anodized aluminum end pieces and attached to universal mast and boom fittings.  Fittings are included along with machine screw fasteners, the proper drill and tap and hex wrench. The mast fitting includes a round slide which, used in the luff groove, avoids drilling into the mast. Flat slides in varying widths are available from the factory.  The slides can often be inserted at the sail opening above the gooseneck and slid down reassembling the fitting in position. If slides are not usable, the fitting can be attached directly to the mast using the same drill and tap provided for the boom.  The custom extruded boom track is contoured to fit both round and flat bottom booms. The track has an adjustable clevis pin to set the maximum height the Boomkicker will lift the boom. The track length forward of the pin allows the boom to move higher if needed.

]]> https://tylaska.com/product/k1000-customized-for-catalina-30-boom-kicker-by-tylaska-27-30-boats/ Thu, 17 Apr 2025 15:28:28 +0000 https://tylaska.com/?post_type=product&p=4710

Robust fiberglass and aluminum construction

Suggested Boat Size - Catalina 30

Initial Pin to Pin - 45 in

Maximum Pin to Pin - 40 in

Maximum Force (1) - 400 lb

Stroke -

• Initial (2) - 15 in
• Min (3) - 6 in

 ]]> Boomkickers  use two coated solid fiberglass spring rods to provide the force necessary to support the boom and mainsail. The rods are clamped into teflon coated, anodized aluminum end pieces and attached to universal mast and boom fittings.  Fittings are included along with machine screw fasteners, the proper drill and tap and hex wrench. The mast fitting includes a round slide which, used in the luff groove, avoids drilling into the mast. Flat slides in varying widths are available from the factory.  The slides can often be inserted at the sail opening above the gooseneck and slid down reassembling the fitting in position. If slides are not usable, the fitting can be attached directly to the mast using the same drill and tap provided for the boom.  The custom extruded boom track is contoured to fit both round and flat bottom booms. The track has an adjustable clevis pin to set the maximum height the Boomkicker will lift the boom. The track length forward of the pin allows the boom to move higher if needed.

]]> https://tylaska.com/product/k1000-customized-for-catalina-27-with-capri-boom-includes-roll-stop-fitting-and-boom-adapter-boom-kicker-by-tylaska-27-30-boats/ Thu, 17 Apr 2025 15:25:43 +0000 https://tylaska.com/?post_type=product&p=4709

Robust fiberglass and aluminum construction

Suggested Boat Size - Catalina 27

Initial Pin to Pin - 45 in

Maximum Pin to Pin - 40 in

Maximum Force (1) - 400 lb

Stroke -

• Initial (2) - 15 in
• Min (3) - 6 in

 ]]> Boomkickers  use two coated solid fiberglass spring rods to provide the force necessary to support the boom and mainsail. The rods are clamped into teflon coated, anodized aluminum end pieces and attached to universal mast and boom fittings.  Fittings are included along with machine screw fasteners, the proper drill and tap and hex wrench. The mast fitting includes a round slide which, used in the luff groove, avoids drilling into the mast. Flat slides in varying widths are available from the factory.  The slides can often be inserted at the sail opening above the gooseneck and slid down reassembling the fitting in position. If slides are not usable, the fitting can be attached directly to the mast using the same drill and tap provided for the boom.  The custom extruded boom track is contoured to fit both round and flat bottom booms. The track has an adjustable clevis pin to set the maximum height the Boomkicker will lift the boom. The track length forward of the pin allows the boom to move higher if needed.

]]> https://tylaska.com/product/k1000-customized-for-catalina-27-boom-kicker-by-tylaska-27-30-boats/ Thu, 17 Apr 2025 15:14:21 +0000 https://tylaska.com/?post_type=product&p=4708

Robust fiberglass and aluminum construction

Suggested Boat Size - Catalina 27

Initial Pin to Pin - 45 in

Maximum Pin to Pin - 40 in

Maximum Force (1) - 400 lb

Stroke -

• Initial (2) - 15 in
• Min (3) - 6 in

 ]]> Boomkickers  use two coated solid fiberglass spring rods to provide the force necessary to support the boom and mainsail. The rods are clamped into teflon coated, anodized aluminum end pieces and attached to universal mast and boom fittings.  Fittings are included along with machine screw fasteners, the proper drill and tap and hex wrench. The mast fitting includes a round slide which, used in the luff groove, avoids drilling into the mast. Flat slides in varying widths are available from the factory.  The slides can often be inserted at the sail opening above the gooseneck and slid down reassembling the fitting in position. If slides are not usable, the fitting can be attached directly to the mast using the same drill and tap provided for the boom.  The custom extruded boom track is contoured to fit both round and flat bottom booms. The track has an adjustable clevis pin to set the maximum height the Boomkicker will lift the boom. The track length forward of the pin allows the boom to move higher if needed.

]]> https://tylaska.com/product/k0750-customized-for-shark-24-by-tylaska/ Thu, 17 Apr 2025 15:12:07 +0000 https://tylaska.com/?post_type=product&p=4707

Robust fiberglass and aluminum construction

Suggested Boat Size - Shark 24

Initial Pin to Pin - 40 in

7/16" Rod Diameter

Stroke -

• Initial (2) - 11 in
• Min (3) - 6 in

 ]]> Boomkickers  use two coated solid fiberglass spring rods to provide the force necessary to support the boom and mainsail. The rods are clamped into teflon coated, anodized aluminum end pieces and attached to universal mast and boom fittings.  Fittings are included along with machine screw fasteners, the proper drill and tap and hex wrench. The mast fitting includes a round slide which, used in the luff groove, avoids drilling into the mast. Flat slides in varying widths are available from the factory.  The slides can often be inserted at the sail opening above the gooseneck and slid down reassembling the fitting in position. If slides are not usable, the fitting can be attached directly to the mast using the same drill and tap provided for the boom.  The custom extruded boom track is contoured to fit both round and flat bottom booms. The track has an adjustable clevis pin to set the maximum height the Boomkicker will lift the boom. The track length forward of the pin allows the boom to move higher if needed.

]]> https://tylaska.com/product/k0750-customized-for-macgregor-26x-by-tylaska/ Thu, 17 Apr 2025 15:07:46 +0000 https://tylaska.com/?post_type=product&p=4706

Robust fiberglass and aluminum construction

Suggested Boat Size - MacGregor 26X

Initial Pin to Pin - 40 in

7/16" Rod Diameter

Stroke -

• Initial (2) - 11 in
• Min (3) - 6 in

 ]]> Boomkickers  use two coated solid fiberglass spring rods to provide the force necessary to support the boom and mainsail. The rods are clamped into teflon coated, anodized aluminum end pieces and attached to universal mast and boom fittings.  Fittings are included along with machine screw fasteners, the proper drill and tap and hex wrench. The mast fitting includes a round slide which, used in the luff groove, avoids drilling into the mast. Flat slides in varying widths are available from the factory.  The slides can often be inserted at the sail opening above the gooseneck and slid down reassembling the fitting in position. If slides are not usable, the fitting can be attached directly to the mast using the same drill and tap provided for the boom.  The custom extruded boom track is contoured to fit both round and flat bottom booms. The track has an adjustable clevis pin to set the maximum height the Boomkicker will lift the boom. The track length forward of the pin allows the boom to move higher if needed.

]]> https://tylaska.com/product/k0750-customized-for-macgregor-26m-by-tylaska/ Thu, 17 Apr 2025 15:03:57 +0000 https://tylaska.com/?post_type=product&p=4705

Robust fiberglass and aluminum construction

Suggested Boat Size - MacGregor 26M

Initial Pin to Pin - 40 in

7/16" Rod Diameter

Stroke -

• Initial (2) - 11 in
• Min (3) - 6 in

 ]]> Boomkickers  use two coated solid fiberglass spring rods to provide the force necessary to support the boom and mainsail. The rods are clamped into teflon coated, anodized aluminum end pieces and attached to universal mast and boom fittings.  Fittings are included along with machine screw fasteners, the proper drill and tap and hex wrench. The mast fitting includes a round slide which, used in the luff groove, avoids drilling into the mast. Flat slides in varying widths are available from the factory.  The slides can often be inserted at the sail opening above the gooseneck and slid down reassembling the fitting in position. If slides are not usable, the fitting can be attached directly to the mast using the same drill and tap provided for the boom.  The custom extruded boom track is contoured to fit both round and flat bottom booms. The track has an adjustable clevis pin to set the maximum height the Boomkicker will lift the boom. The track length forward of the pin allows the boom to move higher if needed.

]]> https://tylaska.com/product/k0750-customized-for-capri-22-with-selden-rig-by-tylaska-20-25-boats/ Thu, 17 Apr 2025 14:51:42 +0000 https://tylaska.com/?post_type=product&p=4704

Robust fiberglass and aluminum construction

Suggested Boat Size - Capri 22

Initial Pin to Pin - 40 in

7/16" Rod Diameter

Stroke -

• Initial (2) - 11 in
• Min (3) - 6 in

 ]]> Boomkickers  use two coated solid fiberglass spring rods to provide the force necessary to support the boom and mainsail. The rods are clamped into teflon coated, anodized aluminum end pieces and attached to universal mast and boom fittings.  Fittings are included along with machine screw fasteners, the proper drill and tap and hex wrench. The mast fitting includes a round slide which, used in the luff groove, avoids drilling into the mast. Flat slides in varying widths are available from the factory.  The slides can often be inserted at the sail opening above the gooseneck and slid down reassembling the fitting in position. If slides are not usable, the fitting can be attached directly to the mast using the same drill and tap provided for the boom.  The custom extruded boom track is contoured to fit both round and flat bottom booms. The track has an adjustable clevis pin to set the maximum height the Boomkicker will lift the boom. The track length forward of the pin allows the boom to move higher if needed.

]]> https://tylaska.com/product/k0750-customized-for-capri-22-by-tylaska-20-25-boats/ Thu, 17 Apr 2025 14:49:02 +0000 https://tylaska.com/?post_type=product&p=4703

Robust fiberglass and aluminum construction

Suggested Boat Size - Capri 22

Initial Pin to Pin - 40 in

7/16" Rod Diameter

Stroke -

• Initial (2) - 11 in
• Min (3) - 6 in

 ]]> Boomkickers  use two coated solid fiberglass spring rods to provide the force necessary to support the boom and mainsail. The rods are clamped into teflon coated, anodized aluminum end pieces and attached to universal mast and boom fittings.  Fittings are included along with machine screw fasteners, the proper drill and tap and hex wrench. The mast fitting includes a round slide which, used in the luff groove, avoids drilling into the mast. Flat slides in varying widths are available from the factory.  The slides can often be inserted at the sail opening above the gooseneck and slid down reassembling the fitting in position. If slides are not usable, the fitting can be attached directly to the mast using the same drill and tap provided for the boom.  The custom extruded boom track is contoured to fit both round and flat bottom booms. The track has an adjustable clevis pin to set the maximum height the Boomkicker will lift the boom. The track length forward of the pin allows the boom to move higher if needed.

]]> https://tylaska.com/product/k0750-customized-for-catalina-c250-with-selden-rig-with-roll-stop-fitting-boom-kicker-by-tylaska-20-25-boats/ Thu, 17 Apr 2025 14:43:04 +0000 https://tylaska.com/?post_type=product&p=4701

Robust fiberglass and aluminum construction

Suggested Boat Size - Catalina 25

Initial Pin to Pin - 40 in

7/16" Rod Diameter

Stroke -

• Initial (2) - 11 in
• Min (3) - 6 in

 ]]> Boomkickers  use two coated solid fiberglass spring rods to provide the force necessary to support the boom and mainsail. The rods are clamped into teflon coated, anodized aluminum end pieces and attached to universal mast and boom fittings.  Fittings are included along with machine screw fasteners, the proper drill and tap and hex wrench. The mast fitting includes a round slide which, used in the luff groove, avoids drilling into the mast. Flat slides in varying widths are available from the factory.  The slides can often be inserted at the sail opening above the gooseneck and slid down reassembling the fitting in position. If slides are not usable, the fitting can be attached directly to the mast using the same drill and tap provided for the boom.  The custom extruded boom track is contoured to fit both round and flat bottom booms. The track has an adjustable clevis pin to set the maximum height the Boomkicker will lift the boom. The track length forward of the pin allows the boom to move higher if needed.

]]>